글 수 690
질문 하시기 전에 검색을 통해 원하는 질문/답변 내용을 찾아봐주세요.

Gyrostabilized camera platform

조회 수 892 추천 수 0 2010.08.23 16:08:04
Koen *.112.9.210

 

Sir, madam,

 

I would like to use the dynamixel to build a gyrostabilized camaraplatform. This will be a 4 axis gimbal. In the first two axis I want to counteract big movement. In axis 3 and 4 I will only counteract  3 degree, but acting at high speed. Apart from that I want the ability for pan and tilt. The gimbal will be attached to a computer and will receive directions to point to a certain GPS waypoint. This information will be updated at 10hz.

Which items do I need for this?

 

Regards,

 

Koen

이 게시물을...
엮인글 :
http://www.robotis.com/xe/26575/fb6/trackback
목록
수정 삭제

댓글 '1'

[레벨:30]ROBOTIS

2010.08.23 16:09:34
*.112.9.210

Hi Koen,

 

Here's the answer to your inquiry.

Our tech guys recommend the AX12+.

 

Here's what you would need to purchase.

 

AX12+(Depending on the DOF)

USB2Dynamixel : 1 set

SMPS : 1 set

SMPS2Dynamixel : 1 set

Please refer to the below for the specs.

http://support.robotis.com/en/techsupport_eng.htm#product/dynamixel/ax_series/dxl_ax_actuator.htm

 

 

If you want a higher torque spec, they recommend the RX-28.

http://support.robotis.com/en/techsupport_eng.htm#product/dynamixel/rx_series/rx-28.htm

 

ROBOTIS

문서 첨부 제한 : 0Byte/ 2.00MB
파일 제한 크기 : 2.00MB (허용 확장자 : *.*)
List of Articles
번호 제목 글쓴이 날짜 조회 수
공지 [ROBOTIS] Please read before posting questions. ROBOTIS 2012-02-07 3757
410 Problem with RoboPlus Motion imagefile [5] Sleven 2010-10-02 921
409 Problem with Wireless Camera [2] uetvnu 2010-10-01 2102
408 RX-28 Controller [5] Andrés 2010-09-29 910
407 Zigbee <- -> PC [1] Hanni 2010-09-22 884
406 Question abou type of command?? [1] SAKIS 2010-09-21 789
405 Zigbee's RX problem [1] swxn 2010-09-15 763
404 Wireless PC connection with Premium Kit [3] Paul 2010-09-14 2371
403 A few questions, if anyone is bored enough to explain. [1] matt 2010-09-11 810
402 more advance moves/dance for Expert kit CM-5 [3] Mauricio 2010-09-01 1103
401 High Torque AX 12 in endless turn [3] taufik 2010-08-31 1169
» Gyrostabilized camera platform [1] Koen 2010-08-23 892
399 [AX-12+] Power loss and fail to follow correct goal position [1] 김승아 2010-08-20 770
398 extra zeros in status packet and dropped 0xFF byte [5] MTR 2010-08-14 1001
397 [EX-106] Pose Utility [1] Customer 2010-08-12 840
396 Problem connecting with RS485 serial port [1] Ugo 2010-08-05 1088
395 how to write an instruction packet for reading present position i... [4] aditya 2010-08-03 1081
394 Problem with CM-510 [5] Rami 2010-08-02 1160
393 [HELP] dynamixel RX-64 transfer function [1] dhona 2010-08-02 1009
392 How to program CM2+ using MATLAB? [3] lokesh sardana 2010-08-01 986
391 Multiple motors detection problem [1] Rami 2010-07-29 948
목록
쓰기
XE Login